The Fox F14-651 3/4" Bench Top Mortiser is one of Foxs most popular tools. It is a robust machine with a cast iron construction that provides brilliant stability. It has two steel columns & a unique 180 degree rotating base to allow the user to mortise off-bench. There is a 370W induction motor & a double bar rack for a precise up & down movement. There is a user adjustable depth stop for exact & repetitive strokes & a gas strut that provides a smooth rise & fall movement. It boasts 230mm of head travel & a 180 degree rotating head. Chisel Capacity: 6 to 12mm (1/4 to 1/2 inches) Maximum mortising

Depth: 76mm (3 inches) Drill chuck capacity: 1 to 13mm Table

Size: 340 x 150m Sm wood Table

Size: 180 x 150mm Base

Size: 320 x 200mm Spindle to fence (maximum): 65mm Chisel to table (maximum): 120mm Overall

Height: 780mm Turn headstock: 0 to 360 degrees Motor: 230V 50 Hz 370 W Spindle speed: 1, 400rpm Gross weight: 35kg Net weight: 31kg Packing

Size: 560 x 370 x 260mm











...

The Fox F14-656 1HP Ultimate Mortiser was designed with the serious user & demanding workshop in mind. The powerful 750W induction motor develops 1HP, easily powering mortisers of up to 1" or 25.4mm in softwood & 34;" (19mm) in hardwoods. There is a precision milled cast iron table that gives the user both lateral & longitudinal adjustment options via the well placed hand wheels. There is a hydraulic gas strut that provides counterbalance & ensures optimum control & high quality movement during operation. There is a double bar rack for accurate up & down movement & a user adjustable depth stop for precise & repeatable strokes. The head of this mortiser travels 200mm. ...

The Fox F20-140A Metal Cut-Off Saw is perfect for cutting all types of ferrous & non ferrous materials such as ducts, pipes, frames, reinforced concrete, angle bars, metal screws or cables. It boasts a powerful 2000W motor for a high cutting speed & a helical gear transmission assembled on a ball bearing. There is a fast locking vice that can turn from 0-45 degrees & user safety is taken care of via the spark arrester. There is a vertical handle for ease of use & the head can be blocked off for easy & safe transportation. You can change the disc with only a key thanks to the fast locking device of the transmission shaft. ...

The Fox F22-564-250 10" x 5" Planer Thicknesser is an ideal planing/thicknessing solution for a busy workshop. It is a professional woodworking tool that is tough & sturdy enough to manage even the most difficult jobs. It has a maximum cutting width of 250mm & a maximum thicknesser cutting capacity height of 120mm. There is a large cast aluminium planer bench that measures in at an impressive 920 x 292mm as well as a strong aluminium tilting fence & a 100mm dust port. Motor: 1280W
- 240V (1.5HP) Blade

Size: 261x 16.5x 1.5mm Block Speed: 9000rpm Max Planing

Width: 250mm Max Cutting Depth per Pass: Thicknesser-3mm, Planer-2mm Feed Rate: 6m/min Range of Cutting

Depth: 5-120mm Table Size of Thicknesser: 270x 290mm Table Size of Planer: 920x 262mm Aluminium Parallel Fence Dimensions: 635mmx 124mm Dust Port Diameter: 100mm

Dimensions (h x l x d): 1100x 970x 520mm Weight: 36kg








...

The Fox F22-568 10" x 7" Planer Thicknesser is solid & sturdy. It has a large cast iron thicknessing bed that is securely mounted on a central ram with two columns that ensure accurate & stable work at all times. It has a 2200W induction motor & a maximum cutting width of 250mm. The table itself can be mounted on three separate guides to allow easy working & there is a large parallel guide that offers a large & stable surface. The blades have a long sharpening life thanks to the rotation speed & there is a large capacity dust port also. The engines efficiency is maintained by the motors pulley drive system. Motor: 2200W
- 240V Blade

Size: 250x 30x 3mm Block Speed: 4000rpm Max Planing

Width: 250mm Max Cutting Depth per Pass: Thicknesser-3mm, Planer-2.5mm Feed Rate: 8m/min Range of Cutting

Depth: 5-200mm Table Size of Thicknesser: 250x 600mm Table Size of Planer: 248x 600mm Aluminium Parallel Fence Dimensions: 720x 130mm Dust Port Diameter: 100mm

Dimensions (h x l x d): 720x 1130x 490mm Weight: 148kg








...

The Fox F28-186 Bandsaw is a small & compact bandsaw with a large cutting capacity, allowing you to work on much larger workpieces than you would normally be able to with a bandsaw of this size. There is a cast iron table that tilts to 45 degrees & a 370W induction motor that provides 0.5hp while still remaining quiet. There are both upper & lower bearing blade guides & the upper guide is adjustable via the smooth rack. The upper & lower doors of this machine have micro switches in order to prevent accidental operation when they are open & there is a blade capacity of 3 to 12.7mm wide. Included are 2x 250mm cast aluminium flywheels. Table Dimensions: 340x 340mm Table

Height: 1060mm Max Cutting Capacity
- Throat: 245mm Max Cutting Capacity
-

Height: 150mm Blade Length: 1820mm Blade Speed: 730m/min Dust Port Diameter: 38mm

Dimensions Incl. Stand (h x l x d): 1600x 600x 470mm Weight: 36kg







...

The Fox F28-191 Bandsaw is ideal for cutting up to 160mm in height with a width of anything up to 305mm. Included are two rotation speed levels which can be material specifically adjusted to match the job at h&. There is a 521x 400mm aluminium table that tilts to 45&730; & the 750W induction motor develops 1hp while remaining quiet during operation. There are upper & lower bearing blade guides that are adjustable via the smooth rack. The machine is housed on a steel base & there are 2 x 315mm cast aluminium flywheels. Table

Height: 1060mm Max Cutting Capacity
- Throat: 305mm Max Cutting Capacity
-

Height: 160mm Blade Capacity: 3-20mm Blade Length: 2240mm Blade Speed: 370-800m/min Dust Port Diameter: 100mm

Dimensions Incl. Stand (h x l x d): 1680x 850x 600mm Weight: 49kg







...

The Fox F28-194B Bandsaw is a solid & reliable bandsaw that would be ideally suited to a busy workshop that requires a cutting capacity of up to 230mm. There is a powerful 1500W 2 speed induction motor that provides 2hp while remaining quiet during operation. There is a 548x 400mm cast iron table that tilts to 45 degrees as well as both upper & lower bearing blade guides. The upper blade guide is adjustable via the smooth rack. There are upper & lower doors with micro switches to prevent operation when they are open to ensure user safety. There are 2 x 350mm Cast aluminium flywheels & a blade capacity from 6 to 35mm wide. The whole unit is mounted on a steel base with a storage cupboard. ...

The Fox F31-120 12" Single Disc Sander is perfect for larger project with a demand for higher capacity & a more rapid stock removal. The tool itself is constructed from cast iron for maximum stability & reliability. There is a 750W induction motor for quiet operation during use & a brake for speeds & safe stopping of the disk. The work table is cast iron & tilts to 45 degrees, a mitre gauge is also part of the set up, as is a dust extraction port. ...

The Fox F36-527 10" Table Saw is a well made saw with a strong ribbed cast aluminium table top that is supported by a solid pressed steel body & leg st&. This saw offers great capacity & portability & has a saw blade guard with a riving knife & laser attached. There are extending table extensions for working with larger pieces & the tilt, rise & fall handles are conveniently placed. The 1500W motor develops 2hp & 4500rpm. ...