The Fox F22-568 10" x 7" Planer Thicknesser is solid & sturdy. It has a large cast iron thicknessing bed that is securely mounted on a central ram with two columns that ensure accurate & stable work at all times. It has a 2200W induction motor & a maximum cutting width of 250mm. The table itself can be mounted on three separate guides to allow easy working & there is a large parallel guide that offers a large & stable surface. The blades have a long sharpening life thanks to the rotation speed & there is a large capacity dust port also. The engines efficiency is maintained by the motors pulley drive system. Motor: 2200W
- 240V Blade

Size: 250x 30x 3mm Block Speed: 4000rpm Max Planing

Width: 250mm Max Cutting Depth per Pass: Thicknesser-3mm, Planer-2.5mm Feed Rate: 8m/min Range of Cutting

Depth: 5-200mm Table Size of Thicknesser: 250x 600mm Table Size of Planer: 248x 600mm Aluminium Parallel Fence Dimensions: 720x 130mm Dust Port Diameter: 100mm

Dimensions (h x l x d): 720x 1130x 490mm Weight: 148kg








...

The Fox F28-182 FOX Bandsaw is the perfect machine for a workshop where space is at a premium. Its height cutting capacity is a unique 85mm, its width capacity is 200mm. The featured press steel work bench (300mm x 300mm) tilts to 45 degrees, & the 200W induction motor is quiet while still providing 0.5hp. There is an integral dust port with a diameter of 38mm. ...

The Fox F28-186 Bandsaw is a small & compact bandsaw with a large cutting capacity, allowing you to work on much larger workpieces than you would normally be able to with a bandsaw of this size. There is a cast iron table that tilts to 45 degrees & a 370W induction motor that provides 0.5hp while still remaining quiet. There are both upper & lower bearing blade guides & the upper guide is adjustable via the smooth rack. The upper & lower doors of this machine have micro switches in order to prevent accidental operation when they are open & there is a blade capacity of 3 to 12.7mm wide. Included are 2x 250mm cast aluminium flywheels. Table Dimensions: 340x 340mm Table

Height: 1060mm Max Cutting Capacity
- Throat: 245mm Max Cutting Capacity
-

Height: 150mm Blade Length: 1820mm Blade Speed: 730m/min Dust Port Diameter: 38mm

Dimensions Incl. Stand (h x l x d): 1600x 600x 470mm Weight: 36kg







...

The Fox F28-191 Bandsaw is ideal for cutting up to 160mm in height with a width of anything up to 305mm. Included are two rotation speed levels which can be material specifically adjusted to match the job at h&. There is a 521x 400mm aluminium table that tilts to 45&730; & the 750W induction motor develops 1hp while remaining quiet during operation. There are upper & lower bearing blade guides that are adjustable via the smooth rack. The machine is housed on a steel base & there are 2 x 315mm cast aluminium flywheels. Table

Height: 1060mm Max Cutting Capacity
- Throat: 305mm Max Cutting Capacity
-

Height: 160mm Blade Capacity: 3-20mm Blade Length: 2240mm Blade Speed: 370-800m/min Dust Port Diameter: 100mm

Dimensions Incl. Stand (h x l x d): 1680x 850x 600mm Weight: 49kg







...

The Fox F28-194B Bandsaw is a solid & reliable bandsaw that would be ideally suited to a busy workshop that requires a cutting capacity of up to 230mm. There is a powerful 1500W 2 speed induction motor that provides 2hp while remaining quiet during operation. There is a 548x 400mm cast iron table that tilts to 45 degrees as well as both upper & lower bearing blade guides. The upper blade guide is adjustable via the smooth rack. There are upper & lower doors with micro switches to prevent operation when they are open to ensure user safety. There are 2 x 350mm Cast aluminium flywheels & a blade capacity from 6 to 35mm wide. The whole unit is mounted on a steel base with a storage cupboard. ...

The Fox F36-527 10" Table Saw is a well made saw with a strong ribbed cast aluminium table top that is supported by a solid pressed steel body & leg st&. This saw offers great capacity & portability & has a saw blade guard with a riving knife & laser attached. There are extending table extensions for working with larger pieces & the tilt, rise & fall handles are conveniently placed. The 1500W motor develops 2hp & 4500rpm. ...

The Fox F50-177A-240 Universal Workstation is light weight & compact. Because of its size, it is ideal for the smaller workshop or the tradesman who is on the move for much of the working day. It has a 1200mm bed with a unique clamping system & 2 x 440mm extension bars for longer workpieces. The legs are adjustable, have 3 positions & are push & click. There is also a powertool take-off for multi tool use. ...

The Fox F50-800-240 Wet & Dry Vacuum Extractor gives the user a strong reliable performance. The 1400W motor develops 1.75hp. It has a 230V powertool take-off socket for automatic start-up & delayed shutdown & comes as a complete vacuum kit suitable for site, workshop or home use. It has both a suck & blow facility & can be used for wet or dry applications, there even a foam filter option to cleaning up liquids with ease. ...

The Fox F50-801 Dust Extractor is purpose built to work with the Fox Drywall Power Sander & Diamond Core Drills. It has integrated switching for tools up to 2200W & is triple filtered. It has a pulse system, a power take-off & is suitable for wet & dry extraction. There is also a blower function. ...

The Fox F50-821 1HP Chip Collector is a compact & portable extractor that is ideal for workshops where space may be limited. If you have a workshop where you require powerful extraction solutions but cant spare the space required by some of the larger options, then this chip collector is perfect. It has a quiet 750W induction motor that generates 1HP & can be wall mounted to save extra space. This unit comes with an extraction hood & an arm for positioning the unit near a workpiece. ...