The cast iron construction with solid steel bars creates a heavy smooth running professional standard lathe. The adjustable tapered bearing gives far more support than ball races enabling bowls up to 30" in diameter to be turned with ease. The 3/4hp motor has sufficient power enabling deeper cuts to be made & speeding up some of the more laborious tasks such as roughing & scraping. Kit

Includes::
- 4 Pronged drive centre, ring centre, 10” tool rest, spindle spanner & allen keys


...

A versatile popular form of chucking, from the most delicate goblets up to 1212;" wet wood bowls. The CWA61 woodscrew chuck is precision machined to tight to minimise spiralling & chattering. Suitable for both hard & soft woods, this chuck is recommended for timber up to 1212;" wide. ...

Manufactured from cast grey iron, Record Power faceplates are precision machined to tight tolerances. Eight countersunk location holes are geometrically located to ensure optimum holding position. The CWA70 faceplate is suitable for bowls up to 12" & can be used on any lathe with a 3/4 x 16tpi spindle. ...

The revolving action of the CWA93 live centre eliminates scorching of the timber that can occur with the use of dead centres. Precision machined with a sealed for life bearing it resists sideways & downward thrust pressures & will enable even out of balance timbers to be worked confidently. ...

The Record Power CX3000 Heavy Duty Dust & Chip Extractor
- HVLP is ideally suited to the demands of a home workshop. It features
...

Mortice & tenon joints are the single most common joint used in woodworking due to their structural integrity & simplicity, but cutting accurate mortices by hand is a laborious & tricky job. This machine makes accurate & repeated cutting of mortices easy. A hollow square chisel with bit (not supplied) is driven into the timber to produce clean sided square holes. The width of the hole is affected by the size of chisel & bit chosen & if it needs to be bigger than the maximum chisel size the table can slide forward or backwards by simple handwheel adjustment for another series of perfectly parallel cuts to be made, the depth is set on the machine with simple stops for repeatable accuracy. The length of the mortice is increased by moving the table laterally, also on a simple slide operated with a separate handwheel. The head driving the chisel is easily lowered toward the timber with a large handle assisted by rack & pinion & returns to the starting position with the aid of a gas strut. Construction is of heavy cast iron with machined dovetail slides & gib strips for easy adjustment ...

To fit lathes with 1" x 8tpi spindle thread, this chuck set is ideal for new woodturners, as a spare chuck or for smaller lathes. It is simple to operate & forgiving towards turning tolerances. It everything necessary for a wide range of the most popular applications such as bowls, platters, pepperpots, goblets, pens & many others. The kit contains a 25mm & a 50mm jaw that can contract to grip spigots externally or expand to grip recesses internally; it also contains a stepped jaw for contracting on to the base of different sizes of bowl without crushing the timber & finally a woodscrew insert is included for turning larger bowls & platters. ...

To fit lathes with 3/4" x 16tpi spindle thread, this chuck set is ideal for new woodturners, as a spare chuck or for smaller lathes. It is simple to operate & forgiving towards turning tolerances. It everything necessary for a wide range of the most popular applications such as bowls, platters, pepperpots, goblets, pens & many others. The kit contains a 25mm & a 50mm jaw that can contract to grip spigots externally or expand to grip recesses internally; it also contains a stepped jaw for contracting on to the base of different sizes of bowl without crushing the timber & finally a woodscrew insert is included for turning larger bowls & platters. ...

This professional engraver uses a unique hammer action to make a permanent mark on all kinds of material. Can be used for decorative engraving, security marking or batch marking. This versatile tool comes packaged with a range of points suitable for glass, soft metals & alloys & hardened steel & is also supplied with an abrasive point for frosting glass or smoothing other materials. Supplied in a handy carry case. ...

Essential for accurate & repeatable straightening or dimensioning of material this machine is ideal for a serious home workshop. Enabling the use of unprocessed or reclaimed timber this machine quickly saves money as well as improving quality of stock. Featuring re-sharpenable blades, cast iron thicknessing bed, coated surfacing tables & an integral pedal operated wheelkit as standard. Kit

Includes::
- Leg stand with integral wheel kit, dust extraction hoods, blade setting gauge, allen keys & spanner.5 Year guarantee.


...