About Us
Contact Us
Privacy Policy
Cookie Usage
Add Your Store

More From Contributor

Laser Laser 8175 LTR Bike Storage & Tune Up Stand
Laser Laser 8175 LTR
Bike Storage & Tune Up
Stand
£22.99
This adjustable bike stand holds onto the rear wheel fixings, supporting the bike in an upright position, providing a safe way to store or display a bicycle without having to lean it against anything else, as well as providing a simple & steady work st&. The rear wheel can be set so that it is raised off the ground, enabling the rear wheel to be rotated allowing the gears to be checked & adjusted, chain & drivetrain cleaned & the rear wheel inspected to see if it is running true. ...
Available
Laser Laser 8176 LTR Cable Puller Pliers
Laser Laser 8176 LTR
Cable Puller Pliers
£14.98
Ideal for use when fitting or adjusting brake cables, these cable pullers act as an extra pair of hands to grip & hold a cable in position whilst the pinch bolt is being tightened. The thumb lock allows for one-handed operation, helping to ensure the cable is tensioned correctly first time, minimising any potential damage caused to the cable by having to repeatedly clamp & readjust it. ...
Available
Laser Laser 8177 LTR Handlebar Holder
Laser Laser 8177 LTR
Handlebar Holder
£18.98
Designed to keep bars steady & inline while carrying out maintenance on a bicycle. This handlebar holder is ideal for when the bike is being hung in a workst&. By hooking over both the top tube & the bars it prevents the front of the bike from turning whilst being worked on. ...
Available
Laser Laser 8178 LTR Tube Cutting Guide
Laser Laser 8178 LTR
Tube Cutting Guide
£24.98
Tube cutter for fork steerer tubes, handlebars, seat posts, or any round tubing up to 31.75mm (1 1/4") diameter, this tool ensures a professional & accurate cut every time. The internal contact points on the guide are non-scratching nylon & support the tube being cut so that it's not crushed or damaged. It is designed to be clamped in a bench vice allowing the user both hands to steady the cutting process. ...
Available
Laser Laser 8179 LTR Valve Core Removal Tool
Laser Laser 8179 LTR
Valve Core Removal
Tool
£7.99
Designed to remove & refit both Schrader & Presta type valve cores, this tool is a must when adding tyre sealant, fitting a Presta valve extender or replacing a valve core. Despite its small diameter, the knurled finish provides the grip needed to loosen & tighten the valve without requiring additional tools. Due to its compact size it would make for a great addition to any cyclists tool kit when out on a ride, especially when running a tubeless set up. ...
Available
Laser Laser 8181 LTR Wheel Alignment Gauge
Laser Laser 8181 LTR
Wheel Alignment Gauge
£55.99
A wheel alignment gauge (dishing tool), is essential for ensuring the wheel sits correctly in the frame or forks by allowing you to check that the rim is centred between the locking nuts on either side of the hub. ideal to be used when wheel building or truing a buckled wheel. ...
Available
Laser Laser 8182 LTR Chain Link Pliers
Laser Laser 8182 LTR
Chain Link Pliers
£9.98
These pliers are perfect for removing bicycle chains that use a master link. Due to the way master links fit together, they are kept in place by the chain being pulled tight whilst pedalling. This combined with wear, corrosion & grime can make them difficult to undo without the correct tool. These chain link pliers gently squeeze the master link together so that it opens allowing for the chain to be split & removed for maintenance, cleaning or replacement. ...
Available
Laser Laser 8183 LTR 2-in-1 Chain Link Pliers
Laser Laser 8183 LTR
2-in-1 Chain Link
Pliers
£16.99
This chain tool not only enables the removal of stubborn master chain links, but because it also features an extra jaw it allows for the link to be refitted & pulled into the closed position. Due to the way that chain master links fit together they are kept in place by the chain being pulled tight whilst pedalling, this combined with wear, corrosion & grime can make them difficult to then undo without the use of the correct tool. ...
Available
Laser Laser 8184 LTR Chain Rivet Extractor Tool
Laser Laser 8184 LTR
Chain Rivet Extractor
Tool
£18.98
For use on 3/32” chains, this chain tool is used to remove & install chain rivets. Both the main handle & T-handle of the driver have a cushioned grip, so are comfortable to hold when applying the force necessary to wind the rivet through the links. The fine thread on the drive pin makes it not only smooth to turn, but allows for precise adjustment of the rivet when fitting ...
Available
Laser Laser 8185 LTR Cassette Pliers
Laser Laser 8185 LTR
Cassette Pliers
£22.99
More stable than a basic chain whip tool, these cassette pliers have a spring loaded jaw to grip onto the sprocket & hold the cassette firmly while the lock ring is being loosened. For use with a cassette lockring tool, this makes a great addition to the tool kit of anyone that needs to remove or replace a cassette as part of their regular maintenance routine ...
Available

Laser Laser 8180 LTR Spoke Nipple Driver

Recommended for use when lacing spokes into a bicycle wheel, this spoke nipple driver allows for nipples to be fitted and tightened through the wheel rim at speed due to its clever cranked design. The head of the driver features a tab to fit into the spoke hole helping to hold the nipple in place whilst it is being offered up to the hole in the rim. Intended to be used to initially tighten the nipple until all the spokes are fitted and are starting to tension, at which point a spoke key can be used.
Buy
  • Availability: In Stock
  • Supplier: Machine Mart
  • SKU: 040212946
Availability: In Stock
£9.98
cycling Bicycle Tools
Description Reviews / Comments Add New

Product Description

Recommended for use when lacing spokes into a bicycle wheel, this spoke nipple driver allows for nipples to be fitted & tightened through the wheel rim at speed due to its clever cranked design. The head of the driver features a tab to fit into the spoke hole helping to hold the nipple in place whilst it is being offered up to the hole in the rim. Intended to be used to initially tighten the nipple until all the spokes are fitted & are starting to tension, at which point a spoke key can be used.

Reviews/Comments

Add New

Intelligent Comparison

Available
Laser Laser 8187 LTR Spoke Tension Meter
Laser Laser 8187 LTR Spoke Tension Meter Machine Mart
£62.99
Available
Laser Laser 8188 LTR Spoke Wrench
Laser Laser 8188 LTR Spoke Wrench Machine Mart
£4.99

Price History

Vouchers

No voucher codes found.
Do you know a voucher code for this product or supplier? Add it to Insights for others to use.

Facebook

Jargon Buster

Tension - A force that is stretching an object
Tension - Also known as stress, a situation where a human can not cope with emotional or physical threats
Key - A physical or virtual device or code used for opening something
speed - A measurement of how fast an object travels between two points
Design - A drawing or styles that shows the look and functionality of something before its made.
Head - The upper part of a body typically separated by the neck.

Supplier Information

Machine Mart
Get the job done with Machine Mart (http://www.machinemart.co.uk)! Explore our extensive range of power tools, hand tools, workshop equipment, and more, designed to tackle any DIY project or professional task with ease. From robust drills and saws to sturdy workbenches and storage solutions, we provide everything you need to build, repair, and maintain your home or workplace. With top brands like DeWalt, Makita, and Clarke, you can trust in quality and reliability. Plus, enjoy expert advice, unbeatable prices, and convenient delivery options. Shop now and unleash your potential with Machine Mart!
Page Updated: 2024-03-04 10:03:09

Community Generated Product Tags

Oh No! The productWIKI community hasn't generated any tags for this product yet!
Menu