About Us
Contact Us
Privacy Policy
Cookie Usage
Add Your Store

More From Contributor

Laser Laser 8170 LTR Chainring Nut Tool
Laser Laser 8170 LTR
Chainring Nut Tool
£4.99
Designed to access the narrow spaces behind the chainset, this low profile chainring nut spanner holds the nut still to prevent it from turning when tightening or loosening the chainring bolt using a Hex or Star key. ...
Available
Laser Laser 8171 LTR 2 piece Hub Cone Spanner Set
Laser Laser 8171 LTR 2
Piece Hub Cone Spanner
Set
£6.98
Badly adjusted or loose cone nuts can cause unnecessary wear & damage to both the wheel bearings & inner hub components. These super slim cone spanners allow for the cone nuts to be tightened hard up against the axle lock nuts so that they don't then come undone taking the hub bearings back out of adjustment. This set covers the 4 most popular sizes & are long enough to provide a good amount of leverage. ...
Available
Laser Laser 8172 LTR Chain Whip
Laser Laser 8172 LTR
Chain Whip
£12.98
For use when removing & installing sprockets & cassettes. A chain whip, also known as a sprocket remover or a sprocket holder, is used to hold the cogs on the rear wheel in place as a lockring tool is used to undo the cassette in the opposite direction. ...
Available
Laser Laser 8173 LTR Crank Removal Tool
Laser Laser 8173 LTR
Crank Removal Tool
£9.98
This crank extractor is used for the correct removal of crank arms & chainsets that use a square-tapered, or splined ISIS Drive, bottom bracket. The threaded collar screws into the crank arm before the drive bolt gently forces the bottom bracket axle away from the tool & out of the crank arm. It also features a 14mm socket at one end for the removal of the crank bolt/nut. ...
Available
Laser Laser 8174 LTR Internal Cable Routing Tool
Laser Laser 8174 LTR
Internal Cable Routing
Tool
£37.99
For use when having to guide new cables through an internally routed frame, this kit uses magnets to make light work of a task that can be both time-consuming & frustrating. It comes supplied with adaptors to fit inner gear & brake cables, Shimano Di 2 wires (e-Tube cables), outer gear & brake housing, & hydraulic brake lines ...
Available
Laser Laser 8176 LTR Cable Puller Pliers
Laser Laser 8176 LTR
Cable Puller Pliers
£14.98
Ideal for use when fitting or adjusting brake cables, these cable pullers act as an extra pair of hands to grip & hold a cable in position whilst the pinch bolt is being tightened. The thumb lock allows for one-handed operation, helping to ensure the cable is tensioned correctly first time, minimising any potential damage caused to the cable by having to repeatedly clamp & readjust it. ...
Available
Laser Laser 8177 LTR Handlebar Holder
Laser Laser 8177 LTR
Handlebar Holder
£18.98
Designed to keep bars steady & inline while carrying out maintenance on a bicycle. This handlebar holder is ideal for when the bike is being hung in a workst&. By hooking over both the top tube & the bars it prevents the front of the bike from turning whilst being worked on. ...
Available
Laser Laser 8178 LTR Tube Cutting Guide
Laser Laser 8178 LTR
Tube Cutting Guide
£24.98
Tube cutter for fork steerer tubes, handlebars, seat posts, or any round tubing up to 31.75mm (1 1/4") diameter, this tool ensures a professional & accurate cut every time. The internal contact points on the guide are non-scratching nylon & support the tube being cut so that it's not crushed or damaged. It is designed to be clamped in a bench vice allowing the user both hands to steady the cutting process. ...
Available
Laser Laser 8179 LTR Valve Core Removal Tool
Laser Laser 8179 LTR
Valve Core Removal
Tool
£7.99
Designed to remove & refit both Schrader & Presta type valve cores, this tool is a must when adding tyre sealant, fitting a Presta valve extender or replacing a valve core. Despite its small diameter, the knurled finish provides the grip needed to loosen & tighten the valve without requiring additional tools. Due to its compact size it would make for a great addition to any cyclists tool kit when out on a ride, especially when running a tubeless set up. ...
Available
Laser Laser 8180 LTR Spoke Nipple Driver
Laser Laser 8180 LTR
Spoke Nipple Driver
£9.98
Recommended for use when lacing spokes into a bicycle wheel, this spoke nipple driver allows for nipples to be fitted & tightened through the wheel rim at speed due to its clever cranked design. The head of the driver features a tab to fit into the spoke hole helping to hold the nipple in place whilst it is being offered up to the hole in the rim. Intended to be used to initially tighten the nipple until all the spokes are fitted & are starting to tension, at which point a spoke key can be used. ...
Available

Laser Laser 8175 LTR Bike Storage & Tune Up Stand

This adjustable bike stand holds onto the rear wheel fixings, supporting the bike in an upright position, providing a safe way to store or display a bicycle without having to lean it against anything else, as well as providing a simple and steady work stand. The rear wheel can be set so that it is raised off the ground, enabling the rear wheel to be rotated allowing the gears to be checked and adjusted, chain and drivetrain cleaned and the rear wheel inspected to see if it is running true.
Buy
  • Availability: In Stock
  • Supplier: Machine Mart
  • SKU: 080828175
Availability: In Stock
£22.99
cycling Bicycle Storage
Description Reviews / Comments Add New

Product Description

This adjustable bike stand holds onto the rear wheel fixings, supporting the bike in an upright position, providing a safe way to store or display a bicycle without having to lean it against anything else, as well as providing a simple & steady work st&. The rear wheel can be set so that it is raised off the ground, enabling the rear wheel to be rotated allowing the gears to be checked & adjusted, chain & drivetrain cleaned & the rear wheel inspected to see if it is running true.

Reviews/Comments

Add New

Intelligent Comparison

Available
Laser Laser 8193 LTR Bike Repair Stand
Laser Laser 8193 LTR Bike Repair Stand Machine Mart
£89.99
Available
Laser Laser 8190 LTR Wheel Truing Stand
Laser Laser 8190 LTR Wheel Truing Stand Machine Mart
£108.00

Price History

Vouchers

No voucher codes found.
Do you know a voucher code for this product or supplier? Add it to Insights for others to use.

Facebook

Jargon Buster

running - A sport or hobbie of moving rapidly on foot. Can also refer to the running of equipment or run time refering to the length of time an applicance can run or the quiet running of an applicance.
Set - a group of items usually related to one another. Some objects cannot function without the complete set of items.
Adjustable - Something that can be changed or slightly modified to fit.
Simple - Basic, easy no difficulty in understanding.
Adjustable - Something that can be changed in order to fit better.
Fixings - An action of sticking an item to another surface.

Supplier Information

Machine Mart
Get the job done with Machine Mart (http://www.machinemart.co.uk)! Explore our extensive range of power tools, hand tools, workshop equipment, and more, designed to tackle any DIY project or professional task with ease. From robust drills and saws to sturdy workbenches and storage solutions, we provide everything you need to build, repair, and maintain your home or workplace. With top brands like DeWalt, Makita, and Clarke, you can trust in quality and reliability. Plus, enjoy expert advice, unbeatable prices, and convenient delivery options. Shop now and unleash your potential with Machine Mart!
Page Updated: 2024-03-04 10:03:09

Community Generated Product Tags

Oh No! The productWIKI community hasn't generated any tags for this product yet!
Menu