Mortice & tenon joints are the single most common joint used in woodworking due to their structural integrity & simplicity, but cutting accurate mortices by hand is a laborious & tricky job. This machine makes accurate & repeated cutting of mortices easy. A hollow square chisel with bit (not supplied) is driven into the timber to produce clean sided square holes. The width of the hole is affected by the size of chisel & bit chosen & if it needs to be bigger than the maximum chisel size the table can slide forward or backwards by simple handwheel adjustment for another series of perfectly parallel cuts to be made, the depth is set on the machine with simple stops for repeatable accuracy. The length of the mortice is increased by moving the table laterally, also on a simple slide operated with a separate handwheel. The head driving the chisel is easily lowered toward the timber with a large handle assisted by rack & pinion & returns to the starting position with the aid of a gas strut. Construction is of heavy cast iron with machined dovetail slides & gib strips for easy adjustment ...

To fit lathes with 1" x 8tpi spindle thread, this chuck set is ideal for new woodturners, as a spare chuck or for smaller lathes. It is simple to operate & forgiving towards turning tolerances. It everything necessary for a wide range of the most popular applications such as bowls, platters, pepperpots, goblets, pens & many others. The kit contains a 25mm & a 50mm jaw that can contract to grip spigots externally or expand to grip recesses internally; it also contains a stepped jaw for contracting on to the base of different sizes of bowl without crushing the timber & finally a woodscrew insert is included for turning larger bowls & platters. ...

To fit lathes with 3/4" x 16tpi spindle thread, this chuck set is ideal for new woodturners, as a spare chuck or for smaller lathes. It is simple to operate & forgiving towards turning tolerances. It everything necessary for a wide range of the most popular applications such as bowls, platters, pepperpots, goblets, pens & many others. The kit contains a 25mm & a 50mm jaw that can contract to grip spigots externally or expand to grip recesses internally; it also contains a stepped jaw for contracting on to the base of different sizes of bowl without crushing the timber & finally a woodscrew insert is included for turning larger bowls & platters. ...

This professional engraver uses a unique hammer action to make a permanent mark on all kinds of material. Can be used for decorative engraving, security marking or batch marking. This versatile tool comes packaged with a range of points suitable for glass, soft metals & alloys & hardened steel & is also supplied with an abrasive point for frosting glass or smoothing other materials. Supplied in a handy carry case. ...

Essential for accurate & repeatable straightening or dimensioning of material this machine is ideal for a serious home workshop. Enabling the use of unprocessed or reclaimed timber this machine quickly saves money as well as improving quality of stock. Featuring re-sharpenable blades, cast iron thicknessing bed, coated surfacing tables & an integral pedal operated wheelkit as standard. Kit

Includes::
- Leg stand with integral wheel kit, dust extraction hoods, blade setting gauge, allen keys & spanner.5 Year guarantee.


...

This set contains 12 chisels made from polished alloy steel to keep their cutting edge longer & resist corrosion. Complete with an educational DVD & booklet, this set is great value & would make an excellent gift for any keen woodworker. ...

This is a heavy duty professional router table ideal for 1/2" routers. The main table is of cast iron to provide a rigid platform. The main fence has independently adjustable infeed & outfeed fences with micro adjustment. The fence can be mounted in 3 different positions on the table to adjust for different workpiece sizes & can be reversed when profiling so that all operations are made on the cast table with not need to lean over the sliding table. There is an aluminium sliding table for end grain work with a mitre fence & hold down clamp included. The table lifts up on gas struts for easy access to the router mounting. Mounting is universal with a pair of T Slots either side of the opening & eccentric clamps to fit any make of router. The table is fitted with an NVR switch for safety & provided with a 1/2" collet extension to increase the depth of cut of your router. ...

Heavy cast iron router table suitable for a wide variety of routers & applications.

Includes:: & aluminium

...

The Record Power TS315/UK1 10/12" Cast Iron Saw with Sliding Beam & Scoring features a cast iron motor housing & unit that sits within two cast iron trunnions. The trunnions are machined for accuracy & mounted on top of the frame as opposed to mounted on the table. This feature provides accuracy, rigidity & longevity. Separate handweels operate the rise & fall of the blade & the tilting mechanism & operate on sturdy steel lead screws with rolled ACME threads for smooth action. There is a large cast table which is surface ground to ensure a smooth, flat finish. The fence is a cast iron mount with cam locks & fine adjustment, mounted to a steel bar for rock solid performance. The machine has a maximum ripping capacity of 910mm which can be extended to 1250mm with the optional right hand extension kit (not included). The quiet induction motor is a generous 3HP & drives the 10" saw blade & 80mm scoring blade with ease. Scoring is belt driven & can be adjusted from the top of the table to provide a clean cut with minimal break out on veneered sheets & boards. The scoring blade can be removed to allow a 12" blade to be fitted, increasing the maximum cutting depth capacity to 100mm
- a very useful feature when ripping solid timber. Sliding Beam Blade Tilt up to 45° Cast Iron Table Cast Iron Fence Mount Cam Lock Fence Fence Micro-Adjustment Cast Iron Saw Unit Maximum Blade

Size: 315 mm Blade Bore: 30 mm Scoring Blade

Size: 80 mm Scoring Blade Bore: 20 mm Blade Speed: 4000 rpm Maximum Rip Capacity: 915 mm Maximum Rip with Right Hand Extension: 1250 mm Sliding Carriage Stroke: 1250 mm Blade Tilt: 0
- 45 degrees Maximum Depth of Cut 90 degrees: 100 mm Maximum Depth of Cut 45 degrees: 76 mm Table Height from Floor: 895 mm Motor: 3HPWeight: 315kg





...

This Record 1200mm (48") Sash Cramp has slides & heads constructed from tough SG iron, the slide is secured by a solid steel pin that passes through the locating holes. The clamp has flat-bottomed slides & heads, meaning it can stand up without support. The main steel screw quickly & easily applies pressure whilst remaining smooth in operation. ...