United Kingdom
France
Germany
Netherlands
Sweden
USA
Italy
Spain
Sporting Goods > Outdoor Recreation > Cycling > Bicycle Accessories > Bicycle Tools
Available
-
A worn chain shifts
poorly and wears
sprockets at an
accelerated rate. The
CC-3.2 is a Go / No-Go
gauge designed to
accurately indicate when
a chain reaches 0.5% and
0.75% wear - the point at
which most chain
manufacturers suggest
replacement The chain
should be replaced soon
if the 0.75% side fits
into the chain, before
other drive train
components also start to
wear out fast Longer
design measures a greater
length of chain, giving
greater accuracy Made
from precision, laser
cut steel Consider that
if you replace a chain
because of wear other
vital drive-chain
components may need to be
renewed too 10-speed
compatible
Availability: In Stock
£9.99
Available
-
The CWP-7 is a compact
crank puller with a
built-in 8mm hex for
removing crank bolts
Includes two rotating
tips (11.3 mm and 16.3
mm) so it can be used to
remove splined Octalink
and ISIS Drive crank
arms, as well as
square-holed crank arms A
must have multi-fit crank
puller for the home
mechanic Made in the USA
and covered by Park Tools
legendary limited
lifetime warranty
Availability: In Stock
£16.99
Available
-
For Campagnolo
Record/Chorus Part of a
comprehensive range of
freewheel and bottom
bracket removal tools
oversized centre hole and
thin wall design allows
use without removal of
cones and locknuts
investment cast and
heat-treated for strength
and durability one-inch
base fits end of sr-1,
frw-1 park tools or
simply an adjustable
wrench or bench vice high
strength tool steel
compatible with 11-speed
lockrings made in the usa
and covered by park tools
legendary limited
lifetime warranty
Availability: In Stock
£9.99
Available
-
Easy and accurately align
and press headset bearing
cups into frames Totally
eliminates damaged or
misaligned bearing cups
Stepped bushings give a
precise fit from 1 inch
cups all the way to 1.5
inch cups A quick release
design allows for instant
removal after cups are
seated Heat treated and
nickel-plated to give
trouble-free service
Extra long handles for
ease of operation and
superior leverage Can
also be used to press
cartridge bearings into
bottom bracket shells
Made in the USA and
covered by Park Tools
legendary limited
lifetime warranty
Availability: In Stock
£139.99
Available
-
The Specialized EMT Pro
MTB Multi-Tool has
virtually every tool you
could ever find yourself
needing at the side of
the trail. It comes with
a chain tool, 6
different Allen key
sizes, Torx bits,
Philips screwdrivers,
spoke wrenches and, of
course, a bottle opener.
Rugged and lightweight,
the EMT Pro MTB tool
gives you the confidence
that you can fix pretty
much any trail side
emergency. Features
Low-profile forged
aluminium side plates
Forged, CNC machined,
and chrome-plated steel
bits are durable and
rust-resistant
3/4/5/6/8mm Allen keys
plus L-shaped 2mm for
tight spaces Hollowed-out
Allen key cores for
weight savings T25 Torx
and 2 Phillips
screwdriver 7075
aluminium chain breaker
Disc pad separator, two
spoke wrenches, and
bottle opener Weight:
104g
Availability: In Stock
£40.00
Available
-
All-in-one patch kit and
tyre lever combo. The
aluminium case holds
patch kit, tyre levers
serve as press-fit end
caps. The Lezyne Lever
kit includes six glueless
patches, tyre boot and
stainless steel scuffer.
The composite matrix
levers are super durable
and easy to use.
Availability: In Stock
£6.99
Available
-
The Lezyne Sabre lever is
a heavy-duty tyre lever
with 15 mm pedal wrench
and bottle opener.
Forged, heat treated and
CNC machined chromoly
steel. The Lezyne Sabre
tyre lever is a long,
high-leverage 150mm lever
with aggressive hook
design. Sold as a pair.
Availability: In Stock
£18.00
Available
-
The FR-5.2GT is designed
specifically for use when
removing and installing
cassette lockrings from
thru axle hubs Utilizes a
12mm guide pin to
stabilize the tool in use
Fits 12-spline cassette
lockrings from Shimano®,
SRAM® (including 1x),
SunRace®, SunTour®,
Chris King® and others
(23.5mm diameter) Fits
some Shimano® and
similar disc brake rotor
lockrings Made in the USA
and covered by Park Tools
legendary limited
lifetime warranty
Availability: In Stock
£9.99
Available
-
Lezyne really do know how
to make a great looking
product that is also
functional. The SV range
of multi tools is no
exception dont just take
my word for it that get
some fantastic write ups
and reviews.Lezyne SV
Tools are compact, low
profile tools made with
lightweight and durable
materials. They feature
CNC machined aluminum
side plates and a forged
and CNC-machined aluminum
chain breaker (9/10/11
speed chain - SV10 and
11). The Stainless Steel
bits and fastening
hardware are durable and
corrosion resistant.
Forged, Center-pivot
bits increase tool
rigidity and improve
ergonomics.SpecificationCOLORS:
Silver/High PolishSV
7:WEIGHT:65gDIMENSIONS:32W
× 63L × 12H (mm)TOOL
BITS:
Availability: In Stock
£21.99
Available
-
Perfect for taking on
every ride Unique Park
I-Beam technology is
strong, compact and
lightweight The I-Beam
creates a structure to
mount all the tools onto
1.5, 2, 2.5, 3, 4,
5, 6 and 8 mm wrenches
cover most fixings on a
bike including many crank
bolts A T25 Star shaped
wrench is useful for Disc
brake rotor bolts A
straight blade
screwdriver is ideal for
adjusting screws on brake
and gear components All
tools fold into the
I-Beam to create a neat
regular shape that will
slip easily into a jersey
pocket or seatpack A must
have take-along tool for
road and off-road use
Covered by Park Tools
legendary limited
lifetime warranty
Availability: In Stock
£14.99
Available
-
All-in-one patch kit and
tyre lever combo. The
aluminium case holds
patch kit, tyre levers
serve as press-fit end
caps. The Lezyne Lever
kit includes six glueless
patches, tyre boot and
stainless steel scuffer.
The composite matrix
levers are super durable
and easy to use.
Availability: In Stock
£6.99
Available
-
Lezyne really do know how
to make a great looking
product that is also
functional. The SV range
of multi tools is no
exception dont just take
my word for it that get
some fantastic write ups
and reviews.Lezyne SV
Tools are compact, low
profile tools made with
lightweight and durable
materials. They feature
CNC machined aluminum
side plates and a forged
and CNC-machined aluminum
chain breaker (9/10/11
speed chain - SV10 and
11). The Stainless Steel
bits and fastening
hardware are durable and
corrosion resistant.
Forged, Center-pivot
bits increase tool
rigidity and improve
ergonomics.SpecificationCOLORS:
Silver/High PolishSV
5:WEIGHT:50gDIMENSIONS:
24W × 63L × 12H
(mm)TOOL BITS:
Availability: In Stock
£17.99
Available
-
Lezyne really do know how
to make a great looking
product that is also
functional. The SV range
of multi tools is no
exception dont just take
my word for it that get
some fantastic write ups
and reviews.
Availability: In Stock
£36.99
Available
-
The Lezyne 8 point BB and
ISIS BB tool is a two-way
and 8-point bottom
bracket tool for the CNC
Rod. Two-Way integrated
ISIS splined bottom
bracket tool and 8-point
bottom bracket tool. For
use with 32 mm CNC Rod or
an adjustable wrench.
Compatible with many
popular bottom brackets.
Availability: In Stock
£12.99
Available
-
The Lezyne 3 way wrench
is a heavy duty three-way
wrench with a serviceable
body. Heavy duty, shop
quality three-way wrench.
Two-piece Serviceable
Body allows for easy
replacement/exchange of
bits. Classic,
easy-to-use compact
shape. Durable, CNC
machined hardened steel
body. Heavy duty, drawn
and forged CRV+
anti-corrosion steel
bits. Replacement tool
bits included with each
wrench.
Availability: In Stock
£18.99
Available
-
The Lezyne 3 way wrench
is a heavy duty three-way
wrench with a serviceable
body. Heavy duty, shop
quality three-way wrench.
Two-piece Serviceable
Body allows for easy
replacement/exchange of
bits. Classic,
easy-to-use compact
shape. Durable, CNC
machined hardened steel
body. Heavy duty, drawn
and forged CRV+
anti-corrosion steel
bits. Replacement tool
bits included with each
wrench.
Availability: In Stock
£18.99
Available
-
The Lezyne 3 way wrench
is a heavy duty three-way
wrench with a serviceable
body. Comes with 2mm
/2.5mm & 3mm wrench.
Heavy duty, shop quality
three-way wrench.
Two-piece Serviceable
Body allows for easy
replacement/exchange of
bits. Classic,
easy-to-use compact
shape. Durable, CNC
machined hardened steel
body. Heavy duty, drawn
and forged CRV+
anti-corrosion steel
bits. Replacement tool
bits included with each
wrench.
Availability: In Stock
£18.99
Available
-
The Bontrager Comp
Multi-Tool has all the
essential tools you need
for quick roadside
repairs and adjustments.
It includes a selection
of hex (Allen) keys as
well as flat and philips
screw dirvers and a T25
Torx bit. This simple
tool features a compact
design that easily packs
away yet provides all of
the essential tools to
keep your bike tuned and
running smoothly.
Features 2, 2.5, 3, 4,
5, 6 and 8 hex along
with Phillips, flat and
T25 Alloy sides for a
sleek, lightweight
design
Availability: In Stock
£9.99
Available
-
An accurate way to check
for wear of roller and
pin on chains 1% of wear
is enough to affect
chainrings and sprockets,
and allow shifting
performance to
deteriorate Just insert
the chain Checkers pins
into two links, press
the swing arm gauge, and
then check the gauge
window for an accurate
reading Reads wear from
0.25% to 1% 10-speed
compatible Made in the
USA and covered by Park
Tools legendary limited
lifetime warranty
Availability: In Stock
£29.99
Available
-
The Lezyne CNC rod is a
professional wrench with
a high polish anodized
finish. Professional
grade shop quality
wrench/handle with 32mm
hex opening. Machined set
screw holds tools in
place; tighted by hand or
4mm hex. Extremley
durable and funtional CNC
machined aluminum
constuction. Elegant high
polish anodized finish.
Designed for use with
Two-Way bottom bracket
and cassette tools.
Availability: In Stock
£24.99
Available
-
Camelbak lobo hydration
pack is here to solve all
your Hydration needs. Are
you tired of mud and who
knows what else all over
your bottle, I know I
am! The Camelbak solves
all those issues,
especially the dreaded:
“is it mud or something
else?” Worry no more
The Camelbak Lobo
Hydration Pack has a
3-litre capacity which
will keep you hydrated
for a good 3+ hour ride.
The Camelbak also
provides handy extra
storage space fit for
anything from a food bar
to a jacket. Features
such as an ergonomic
handle to make refilling
your Camelbak simple, a
on and off lever makes it
easier to prevent leaks.
The magnetic Tube Trap™
keeps the tube secure and
easy to access. Air
panels ensure you stay
cool while wearing the
Camelbak. All these and
more demonstrate the
attention to detail and
comfort Camelbak put into
the Lobo Hydration Pack
External hooks let you
carry your helmet while
still allowing full
access to your pack.
Stretch overflow storage
compartment lets you
easily stash a rain shell
or extra layer.
Reflective accents for
visibility in low-light
environments. Removable
stability belt helps to
keep pack secure over
technical terrain.
Designed to fit range:
43-53cm (17-21”) torso
66- 116cm (26-46”)
waist This Item is
perfect for Perfect for
off road riders tired of
the uncertainty when
drinking from dirty water
bottles. Key features
Magnetic Tube Trap
3-litre capacity Air
panels On and off lever
Availability: In Stock
£89.99
Available
-
The Specialized EMT Cage
Mount Road Tool
conveniently attaches an
emergency multi-tool to
any bike with a
SWAT-compatible bottle
cage for easy, no-hassle
transport and storage. On
the tool, you’ll find
a wide array of Allen
keys and a Torx wrench,
so you’ll also be able
to get out of almost any
roadside jam. Features
Mounts to bottom of any
Rib Cage II. Features
hardened CRV steel bits
with anti rust coating
and forged alloy frame.
Includes slotted
screwdriver, 2.5, 3,
4, 5, and 6mm Allen
keys, and T25 Torx. Aero
storage cradle holds tool
securely without
rattling.
Availability: In Stock
£48.00
Available
-
The DAG-2.2 is an
indispensable shop tool
that can be used to both
measure and straighten
misaligned derailleur
hangers, solving a high
percentage of shifting
problems Gauge bar made
from heavy gauge, chrome
plated steel Updated with
tighter tolerances for
improved accuracy Adjusts
to fit 20 to 29+ wheels
Upgraded, large inner
shaft for added strength
Replaceable 10mm x 1
threaded tip Improved
clearance and reach to
work on more
frame/derailleur hanger
combos, including low
clearance thru axle
derailleur hangers Made
in the USA and covered by
Park Tools legendary
limited lifetime warranty
Availability: In Stock
£69.99
Available
-
Part of a range of
combination Headset
wrenches that cover all
bicycle requirements The
Y-head design puts metal
where it is needed for
strength and durability
The laser-cut openings
are a precise fit, as
this operation takes
place after the heat
treatment process
Features a 32 mm wrench
for 1 inch Headsets, and
36 mm wrench for 1-1/8
inch Headsets Made in the
USA and covered by Park
Tools legendary limited
lifetime warranty
Availability: In Stock
£17.99
Available
-
The Finish Line Pro Chain
Cleaner Solo is the
latest version of Finish
Line’s chain cleaning
tool which they have been
making since 1988. It was
one of the first chain
cleaners on the market
and remains one of the
best. Finish Line
recommend using the chain
cleaning tool once or
twice a month to maximize
your bicycles chain life
and enjoy a cleaner,
smoother, and more
efficient drivetrain. The
chain cleaner attaches to
your chain without the
need to remove it from
your bike. The
proprietary rotating
brushes get into all
parts of the chain. In
the newest version of the
chain cleaner Finish Line
have changed the exit
angle on the cleaner from
90 degrees to 47 degrees,
which virtually
eliminates drips and
spills. An additional row
of scrapper pads have
been added for enhanced
side-plate cleaning and a
large magnet has been
added to attract and hold
magnetized wear particles
and is located at the
bottom of the chain
cleaner. Features An easy
and convenient way to
keep your chain clean use
a chain cleaner to remove
caked on dirt and end up
with a chain looking as
good as new chain
cleaners help prolong the
life of the drive chain
if used regularly triple
rotating brushes and side
scrubber pads ensure
every nook and cranny is
reached oversized super
strong magnet collects
metal wear filings that
normally prevent the
chain working at its best
30 degree exit angle and
industrial quality foam
insert totally eliminates
cleaner dripping on the
ground ergonomic handle
and easy closure clamp
make this an easy
one-handed-use tool
Availability: In Stock
£24.99
Available
-
The EXBBT-SOC tool is an
external bottom bracket
tool for the CNC Rod.
External bottom bracket
tool. For use with 32 mm
CNC Rod, adjustable
wrench or 3/8 inch socket
drive. Compatible with
many popular bottom
brackets including
Campagnolo, Chris King,
FSA, Phil Wood, Race
Face, Shimano, SRAM,
Truvativ
Availability: In Stock
£16.99
Available
-
The Lezyne classic chain
rod is a shop quality
chain whip with
integrated lock ring
tool. Shop quality chain
whip with integrated lock
ring tool. Classic
varnished wood handle
with chromoly head.
Custom Lezyne chain,
attached with stainless
hardware for easy
replacement. Compatible
with 8/9/10/11 speed
cassettes.
Availability: In Stock
£24.99
Available
-
An economical way to
store bicycles and spare
wheels Use ceiling beams
as the support for these
hooks Clean sharp threads
requires no pre-drilling
Made from 5/16 inch steel
rod Heavy vinyl coating
protects the bike or
wheel Zinc-plated to
prevent corrosion
Availability: In Stock
£4.99
Available
-
Lezyne really do know how
to make a great looking
product that is also
functional. The SV range
of multi tools is no
exception dont just take
my word for it that get
some fantastic write ups
and reviews.
Availability: In Stock
£42.99
Available
-
16oz container made from
durable, bpa-free pete
material. Wide 63mm
opening makes it easy
toplace and retrieve
itemsfrom inside keg.
Featuring a "stash
cap" on the
underside ofkeg lid,
providing an ideal place
to store patch kits.
Printed with non-solvent
based inks (uv cured),
cpsc-approved ink.
Availability: In Stock
£10.00
Available
-
Specialized SWAT MTB Tool
Only. Replacement SWAT
MTB Tool. Please note
that this ds not include
a storage cradle to
attach to a frame or
cage. Features Made with
hardened CRV steel bits
with anti-rust coating
and forged alloy frame.
Includes slotted
screwdriver, 3, 4, 5,
6, and 8mm Allen keys,
and T25 Torx.
Availability: In Stock
£32.00
Available
-
The Lezyne CNC Pedal ROD
is a heavy duty, shop
quality pedal wrench.
Heavy duty, shop quality
pedal wrench. CNC
machined aluminum handle
with chromoly head. Two
15mm offset wrench
openings positioned for
optimal leverage.
Integrated bottle opener.
Availability: In Stock
£25.99
Available
-
The Bontrager Tyre Lever
Set makes for faster flat
repairs and easier tyre
swaps. Take some of the
frustration out of flat
repair with a pair of
anatomically shaped,
robust tyre levers from
Bontrager. They snap
together for easy
stackable storage and are
bright red so they are
easy to spot in the
bottom of a bag or in the
undergrowth. Features
Angled tip slides easily
under tight beads Safe
for Tubeless tires
Stackable levers snap
together for storage in
saddle bags Longer handle
provides plenty of
leverage
Availability: In Stock
£3.49
Available
-
The Lezyne classic pedal
rod is a shop quality,
varnished wood pedal
wrench. Shop quality
pedal wrench. Classic
varnished wood handle
with chromoly head. Two
15mm offset wrench
openings positioned for
optimal leverage.
Integrated bottle opener.
Availability: In Stock
£22.99
Available
-
Handy tool that fits the
three most common nipple
sizes Size 0 for 3.22 mm
/ 0.127 inch nipples Size
1 is for 3.3 mm / 0.130
inch nipples Size 2 is
for 3.45 mm / 0.136 inch
nipples Fantastic tool
for workshops,
toolboxes, races, or
carrying out on those
long day rides
Availability: In Stock
£9.99
Available
-
Also called a sleeping
hub, the DH-1 fits into
a frames rear dropouts to
replace the rear wheel
for chain cleaning and
transport The unique
design allows shifting
with the DH-1 installed
Works with all derailleur
and 1/8 inch chains Works
on frames with both
open-type dropouts and 12
mm thru axle dropouts
Availability: In Stock
£19.99
Available
-
All-in-one wonderful
trail tool. Innovative
three piece design of
multi-tool, ensuring
that all the tools are
easy to use. All 21 tools
are polished stainless
steel or nickel plated
steel: Phillips and flat
head screwdriver 2, 2.5,
3, 4, 5, 6, 8 mm Hex
keys 8, 9, and 10 mm
spanners Serrated knife
T25 Star shaped wrench,
used on Disc brakes
Chainring nut tool Bottle
opener 2 tyre levers 3
spoke nipple tools Nylon
carrying pouch
Availability: In Stock
£14.99
Available
-
CTPC - Pair of
replacement chain tool
pins for CT2 / CT3 / CT5
/ CT7 Genuine Park Tool
replacement part
Availability: In Stock
£4.99
Available
-
A chain tool that is
small enough to go
anywhere yet performs
like a full-size workshop
tool Fine thread and
slide-away T-handle gives
plenty of pressure at the
pin head to move stubborn
chain rivets Includes a
loosening shelf to
release stiff links after
assembly Replaceable
driving pin head Works on
most bicycle chains,
including 10-speed Weighs
just 77 grams
Availability: In Stock
£14.99
Available
-
All-in-one patch kit and
tyre lever combo. The
aluminium case holds
patch kit, tyre levers
serve as press-fit end
caps. The Lezyne Lever
kit includes six glueless
patches, tyre boot and
stainless steel scuffer.
The composite matrix
levers are super durable
and easy to use.
Availability: In Stock
£6.99
Available
-
The Specialized Mechanic
Wrench Set includes
nearly every wrench
needed for day-to-day
bike repair in one
convenient holder. Nearly
everything on modern
bikes can be done with a
few standard hex (Allen)
keys. The Mechanic Wrench
Set comes with 8
different sizes plus the
two most common Torx bit
sizes. Features
1.5/2/2.5/3/4/5/6/8mm
ball-end Allen keys
Sharpened spoke for
multi-use Rubberised
handles provide
additional grip and
prevent hand sting
T25/T30 Torx
Availability: In Stock
£32.00
Available
-
The Finish Line Grease
Gun is great for
delivering measured
amounts of grease where
you need it when
lubricating pedals,
hubs, bottom brackets,
headsets, crank bolts,
etc. Using the Finish
Line Grease Gun reduces
waste and mess when doing
repairs and fitting
parts. Compatible with
Finish Lines 3.5oz
Premium Grease tubes,
2oz Ceramic Grease tubes.
Fits most other standard
9/16" threaded tubes
of grease. Features: Easy
one hand operation Ideal
for delivering measured
amounts of grease into
hard to reach places.
Long tip for recessed
suspension pivots Great
for lubricating pedals,
hubs, threaded parts,
headsets, crank bolts,
etc. Simply thread a tube
of grease onto the pump
for the perfect solution
to all your precision
regreasing needs, whilst
avoiding the problem of
contaminated grease which
is common with open pots
this long tip grease pump
is suitable for use with
all grease guard
purgeable bearing systems
the pumps special long
tip is precision radiused
to mate exactly with all
popular grease fittings,
and delivers about 2 cc
of grease per stroke this
feature avoids seal
damage, and helps
eliminate the problem of
over greasing which can
actually increase
friction in a bearing
long tip will reach even
the most recessed
suspension pivot grease
ports
Availability: In Stock
£19.99
Available
-
12 splines, 23.5mm
diameter Fits Shimano®,
SRAM® (including 1x),
SunRace®, SunTour®,
Chris King® and other
cassette lockrings Also
fits some Shimano® disc
brake lockrings Made in
the USA and covered by
Park Tools legendary
limited lifetime warranty
Availability: In Stock
£9.99
Available
-
The Fabric Chain Splitter
Compact Chain Tool is a
super handy piece of kit
to carry on your rides. A
broken chain can ruin a
ride, so having the
right kit to hand can
literally make or break a
trip. This portable,
hardened steel tool can
be used to break,
shorten and join all 8 to
12-speed chains. A
detachable pin can be
removed, replaced and
reversed, offering extra
longevity to the most
important part of the
tool. So no matter what
happens to your chain on
the trail, you can get
it sorted on the fly.
Features CNCd hardened
steel Replaceable pin
Fits 8-12 speed chains
Ergonomic body
Availability: In Stock
£19.99
Available
-
Part of a comprehensive
range of freewheel
removal tools 12 splines,
22.6mm diameter. Fits
Shimano, Sachs Aris,
SunRace, DNP Epoch and
other 5-10 speed
freewheels The FR-1.3
includes an enlarged
thru-hole to accommodate
14mm axles Made in the
USA and covered by Park
Tools legendary limited
lifetime warranty
Availability: In Stock
£9.99
Available
-
The Lezyne CNC chain rod
is a heavy duty, shop
quality chain whip with a
lock ring tool. Heavy
duty, shop quality chain
whip with integrated lock
ring tool. CNC machined
aluminum handle with
chromoly head. Custom
Lezyne chain, attached
with stainless hardware
for easy replacement.
Compatible with 8/9/10/11
speed cassettes.
Availability: In Stock
£34.99
Available
-
Prolong drive train life
with this excellent kit
Contains a Cyclone chain
cleaner, GearClean
brush, and 8 oz. of CB-4
Citrus ChainBrite
cleaning fluid Everything
you need to keep the
drivetrain system clean
and running super smooth
Suitable for derailleur
gear, hub gear, and
single-speed bikes Made
in the USA
Availability: In Stock
£34.99
Available
-
16oz container made from
durable, bpa-free pete
material. Wide 63mm
opening makes it easy
toplace and retrieve
itemsfrom inside keg.
Featuring a "stash
cap" on the
underside ofkeg lid,
providing an ideal place
to store patch kits.
Printed with non-solvent
based inks (uv cured),
cpsc-approved ink.
Availability: In Stock
£10.00
Available
-
Check component
tightening specifications
before using 4mm and t25
keys are non-removable
Availability: In Stock
£15.99
Available
-
All-in-one patch kit and
tyre lever combo. The
aluminium case holds
patch kit, tyre levers
serve as press-fit end
caps. The Lezyne Lever
kit includes six glueless
patches, tyre boot and
stainless steel scuffer.
The composite matrix
levers are super durable
and easy to use.
Availability: In Stock
£6.99
Available
-
Specially designed tool
to gently adjust bent or
damaged brake rotors Two
different slot depths are
laser cut from high
quality stainless steel
Compatible with any size
and make of disc rotor
Centre handle is vinyl
dipped for extra comfort
No need to put up with
disc brakes that drag any
more Made in the USA and
covered by Park Tools
legendary limited
lifetime warranty
Availability: In Stock
£19.99
Available
-
Space allotted for hanger
storage Abp hanger sold
separately Includes handy
bottle opener
Availability: In Stock
£19.99
Available
-
The Fenwick’s Gear
Cleaning Brush is fast
and effective on
cassettes, chains, and
gear mechs. The Gear
Cleaning Brush is
designed to provide a
great cleaning action
across the wide range of
modern cassettes. Its
broad brush head cleans
wide ratio cassettes or
close road ratio
cassettes with ease. The
handle keeps your fingers
and knuckles out of
harm’s way, whilst the
dual stiffness bristles
get to work on all of the
nooks and crannies. It
works a treat on the
chain and chain set too.
It’s an ergonomic brush
designed for both road
and off-road bikes. The
brush also features light
coloured bristle so that
it’s easy to identify
when the brush is clean
and being bright orange
it’s easy to find too.
Length: 25cm
Availability: In Stock
£5.99
Available
-
The Specialized EMT 9
Multi-Tool gives you the
tools you need to tighten
and adjust pretty much
any bolt and screw on a
modern road or mountain
bike. It comes with 7
Allen keys plus Torx bit
and Phillips screwdriver.
The EMT 9 Tool is
corrosion-resistant and
folds down flat to easily
slip into a pocket,
saddle pack or bag.
Features Forged aluminium
side plates. Forged steel
bits are nickel plated
for corrosion resistance.
2, 2.5, 3, 4, 5, 6,
and 8mm hex bits T25 Torx
and Phillips head
screwdriver bits.
Availability: In Stock
£20.00
Available
-
The Specialized EMT 12
Multi-Tool has everything
but the kitchen sink.
With 12 different tools,
including a chain tool,
spoke keys, 7 different
Allen keys and
screwdrivers youll be
prepared to fix whatever
bad luck mechanical the
road or trail decides to
throw your way. The whole
tool folds down pretty
flat so it will easily
slide into a jersey
pocket, seat pack or
bag. Features Forged
aluminium side plates.
Forged steel bits are
nickel plated for
corrosion resistance. 2,
2.5, 3, 4, 5, 6, and
8mm hex bits T25 Torx,
Phillips head, and flat
blade screwdriver bits.
Chain breaker with spoke
wrenches.
Availability: In Stock
£32.00
Available
-
Specialized EMT 6
Multi-Tool is
lightweight, minimalist,
and wallet-friendly. The
EMT 6 Tool comes with six
different bits to fit the
most common bolts and
screws on modern
mountain, road and
commuting bikes. The EMT
6 does not have every
tool in the world but
youll have plenty to
manage common roadside
mechanicals. Features
Forged steel bits are
nickel plated for
corrosion resistance. 3,
4, 5, and 6mm hex bits
T25 Torx and Phillips
head screwdriver bits.
Availability: In Stock
£18.00
Available
-
The Specialized SWAT Road
Tool includes tools for
all of the main Allen key
and Torx bolts found on
Specialized road bikes.
This tool will let you do
nearly all road side
adjustments and repairs
on your road bike. This
is a replacement SWAT
Road Tool to fit into the
Specialized SWAT box.
Please note that this
does not include a
storage cradle to attach
to a frame or cage.
Features Made with
hardened CRV steel bits
with anti-rust coating
and forged alloy side
plates.. Includes slotted
screwdriver, 2.5, 3,
4, 5, and 6mm, plus a
T25 Torx.
Availability: In Stock
£32.00
Available
-
An update to the
perennial shop favourite
The CT-3.2 features an
adjustable locating shelf
so it will remove and
install the chain rivet
on any bike chain, from
5 to 11-speed derailleur
chains to 1/8 and 3/16
inch single-speed chains,
making it our most
versatile chain splitter
Made from investment cast
steel, the CT-3.2 has a
comfortable to use size
and fine thread for
making easy work of even
the toughest rivets
Replaceable pin Please
note that CT-3.2 will not
peen the rivets on
Campagnolo 11-speed
chains: for these chains,
a CT-11 Rivet Peening
Tool is also required
Made in the USA and
covered by Parks
legendary limited
lifetime warranty
Availability: In Stock
£34.99
Available
-
The Camelbak Bike Tool
Organiser Roll is a great
way to keep your tools
organised so you dont
have to go scrabbling
about in the bottom of
your bag every time you
need to tighten up a
bolt. Be prepared for
anything the trail throws
at your bike. Keep all of
your bike tools handy
with a compact,
lightweight organizer
roll. Features Secure zip
pocket Open mesh for
visibility Compression
Availability: In Stock
£22.99
Available
-
A selection of essential
Metric hex wrenches in a
convenient folding
package One piece
composite handle is
comfortable,
lightweight, slip
resistant and 40%
stronger than steel
Wrenches are made from
high torque Bondhus
Protanium industrial
quality tool steel for a
long life 1.5, 2, 2.5,
3, 4, 5, and 6 mm size
hex wrenches Made in the
USA and covered by Park
Tools legendary limited
lifetime warranty
Availability: In Stock
£11.99
Available
-
Anti-seize compound
reduces friction in
threaded and press fit
connections for easy
assembly and disassembly
ideal for bottom bracket
and pedal threads,
pressed headset cups,
seat posts, quill stems
etc. Seals and protects
parts from corrosion and
rust under the most
extreme conditions for
use on steel, aluminium,
and titanium
Availability: In Stock
£9.99
Available
-
Shop quality screwdriver
set designed for comfort
and durability Dual
density grips and heated
treated vanadium tips and
shafts Includes two
Phillips cross head size
0 and 2, and two flat
blade 3 and 6 mm
screwdrivers Covered by
Park Tools legendary
limited lifetime warranty
Availability: In Stock
£21.99
Available
-
Punctures are never
convenient, but this is
the most convenient way
to mend a puncture Saves
time because you dont
have to wait for the glue
to dry You can be sure of
a reliable seal, because
you stick the patch on
when you are ready, not
when you think the glue
might be ready A
waterproof box containing
6 self-adhesive patches
The special adhesive was
developed with 3M,
resulting in a patch that
will flex with the tube
Sandpaper for tube
preparation included Your
lightweight and tiny
trail friend
Availability: In Stock
£3.99
Available
-
The SG-7.2 cutting guide
is a specially shaped
guide, designed
specifically to accept
aero-shaped seatmasts and
seatposts up to 3.5
inches (89 mm) deep The
guide can also accept
round tubes from 1-1/4
inch to 1-3/4 inch (32 mm
to 45 mm) in diameter Two
cutting slots are
provided, one for
standard saw blades and
one for thicker, carbon
specific blades Hardened
steel body with moulded
contact points to protect
tubes and frames Made in
the USA and covered by
Park Tools legendary
limited lifetime warranty
Availability: In Stock
£44.99
Available
-
Economical, durable and
versatile, the PFP-8 is
the successor to the best
selling PFP-6 and equally
at home in the garage,
workshop or at the
trailhead The smooth and
durable steel barrel is a
rarity at this pricepoint
and greatly improves
durability whilst
improving efficiency at
high pressures Composite
head with thumb lock fits
Presta, Schrader, and
Dunlop valves Stable
steel base with large
foot-pads Giant, easy to
read gauge is integrated
into the base,
protecting it from harm
and improving stability
Comfortable composite
handle Most parts
available as spares
Availability: In Stock
£34.99
Available
-
Genuine Park Tool
replacement part RBS5 -
Replacement brush set -
for CM5 and CM5.2 Chain
Cleaner
Availability: In Stock
£7.99
Available
-
A compact and value for
money 15 mm pedal spanner
No need to struggle with
the wrong size spanner or
bashed knuckles any more
Perfect for the home
workshop or event tool
box Made from
heat-treated spring steel
with a vinyl dipped
handle for extra comfort
Made in the USA and
covered by Park Tools
legendary limited
lifetime warranty
Availability: In Stock
£11.99
Available
-
The professional way to
remove headset cups Pulls
through headtube until
the flared end snaps open
behind the headset cup
Simply hammer out the cup
safely and neatly Fits up
to 1-1/4 inch headtubes
and headset cups Heat
treated alloy steel with
nickel plated finish Made
in the USA and covered by
Park Tools legendary
limited lifetime warranty
Availability: In Stock
£39.99
Available
-
P-handled hex wrenches 2,
2.5, 3, 4, 5, 6, 8,
and 10mm sizes Bondhus
Balldriver end on each
size allows you to access
awkwardly positioned
bolts from an angle
Bondhus Protanium high
torque industrial steel
Offset P-handles are made
from a durable nylon
material, and are
ergonomically designed
for comfortable use Made
in the USA and covered by
Park Tools legendary
limited lifetime warranty
Availability: In Stock
£74.00
Available
-
Top quality cable cutters
for inner wires and outer
casing, including index
gear cables Precision
ground cutting jaws make
for a clean cut every
time Cold forged and heat
treated steel handles for
massive strength Dual
density moulded grips are
contoured for comfort and
control Built in crimper
for cable end caps
Forming hole for
reforming cable housing
and ferrules A wire latch
holds the handles
together for storage
Covered by Park Tools
legendary limited
lifetime warranty
Availability: In Stock
£35.00
Available
-
Forged with chrome
vanadium (cr-v) steel,
precision ground,
heat-treated, plated and
polished the paw-6 opens
to 24mm and features a
laser engraved
measurement scale and
dipped blue handle for
comfort covered by park
tools legendary limited
lifetime warranty
Availability: In Stock
£24.99
Available
-
Cut any threadless fork
steerer quickly and
accurately with this
handy saw guide Slotted
especially for thicker
carbon cutting blades,
which do not fit in
standard cutting guides
You can easily remove as
little as 1 mm from the
carbon steerer length for
perfect headset
installation and
adjustment Heat treated
for long life The
composite body will not
damage the forks steerer,
but has steel threads
and inserts to withstand
heavy shop use Suitable
for all unthreaded
steerer tubes up to 1-1/4
inches Made in the USA
and covered by Park Tools
legendary limited
lifetime warranty
Availability: In Stock
£39.99
Available
-
Park Tool 0.156"
Spoke Wrench - a classic
spoke wrench, shaped for
comfort and convenience
Professional quality
hardened and nickel
plated spoke wrench
ensures a long life Vinyl
coated handles are colour
coded to make for quick
size recognition Each
size is precision made
for a perfect fit to each
nipple size Blue is for
105 gauge / 0.156 inches
/ 3.96 mm
Availability: In Stock
£9.99
Available
-
A great work stand
accessory built to keep
tools, lubes and spare
parts right at your
fingertips The 106
installs easily utilising
the exclusive Park Tool
receiver pod accessory
system Tray features a
universal, large
compartment, small
compartment, lube
holder, integrated tab
system holds plastic bag
for rubbish, universal
tool / towel bar, and
two receiver pods to
accept accessories Easy
to install or disassemble
Availability: In Stock
£24.99
Available
-
Shop quality, adjustable
torque driver that limits
torque applied to
fasteners, preventing
overtightening and damage
to lightweight components
Adjusts to apply 4, 4.5,
5, 5.5, or 6 Newton
Meter (Nm) of torque when
rotating clockwise All
metal internal
construction for long
life Comfortable
ergonomic composite
molded grip Includes 3mm,
4mm, 5mm and T25 bits
(stored in handle) 1 1/4
inch drive Magnetic
socket retains bits
Assembled and calibrated
at the PARK TOOL factory
in St. Paul, Minnesota
Availability: In Stock
£74.99
Available
-
Replacement pin for SPA-6
adjustable spanner and
HCW-4 bottom bracket pin
spanner Pin is 2.3 mm
diameter
Availability: In Stock
£1.49
Available
-
Precision component
screwdriver machined to
exact standards to ensure
a perfect fit on
compatible component
fasteners Featuring an
ergonomic, CNC machined
and hard anodized 6061
aluminium handle Cross
tip (2 Phillips) driver
built to exceed JIS
standards Covered by Park
Tools legendary limited
lifetime warranty
Availability: In Stock
£29.99
Available
-
Simple and great value
for money The HHP-3 is
designed to install all
sizes of head cups and
one-piece bottom bracket
cups into frames Prolong
the life of your bearings
by installing them
correctly from the start
Made in the USA and
covered by Park Tools
legendary limited
lifetime warranty
Availability: In Stock
£69.99
Available
-
Three hex wrenches in an
effective package
Excellent ergonomics and
effective leverage as the
composite centre fits
into the palm of the hand
Speeds any job up as you
have three hex keys in
your hand at any one time
Made from heat-treated
Bondhus Protanium high
torque steel for a long
life Made in the USA and
covered by Park Tools
legendary limited
lifetime warranty
Availability: In Stock
£11.99
Available
-
The Park Tools Home
Mechanic Starter kit is a
great choice for any
cyclist looking to
maintain and tune their
own bike. Park Tools our
mechanics use in our
workshops as they are
great quality and last
for ages. The Home
Mechanic Starter kit has
the perfect combination
of tools to help the
novice home mechanic
clean, adjust and
maintain their bike and
they come in a custom
Park Tool toolbox The
tools are covered by Park
Tools legendary limited
lifetime warranty. Kit
Includes: AWS-11 Fold-Up
Hex Wrench Set CC-3.2
Chain Checker —
Instructions CN-10
Professional Cable and
Housing Cutter —
Instructions CT-5 Mini
ChainBrute Chain Tool —
Instructions GP-2
Pre-Glued Super Patch Kit
— Instructions GSC-1
GearClean™ Brush
MLP-1.2 Master Link
Pliers — Instructions
PW-5 Pedal Wrench SD-2
Shop Screwdriver: 2
Phillips SW-7.2 Triple
Spoke Wrench TL-1.2 Tire
Lever Set —
Instructions 1622 Torx®
Compatible "L"
Wrench
Availability: In Stock
£99.99
Available
-
Camelbak lobo hydration
pack is here to solve all
your Hydration needs. Are
you tired of mud and who
knows what else all over
your bottle, I know I
am! The Camelbak solves
all those issues,
especially the dreaded:
“is it mud or something
else?” Worry no more
The Camelbak Lobo
Hydration Pack has a
3-litre capacity which
will keep you hydrated
for a good 3+ hour ride.
The Camelbak also
provides handy extra
storage space fit for
anything from a food bar
to a jacket. Features
such as an ergonomic
handle to make refilling
your Camelbak simple, a
on and off lever makes it
easier to prevent leaks.
The magnetic Tube Trap™
keeps the tube secure and
easy to access. Air
panels ensure you stay
cool while wearing the
Camelbak. All these and
more demonstrate the
attention to detail and
comfort Camelbak put into
the Lobo Hydration Pack
External hooks let you
carry your helmet while
still allowing full
access to your pack.
Stretch overflow storage
compartment lets you
easily stash a rain shell
or extra layer.
Reflective accents for
visibility in low-light
environments. Removable
stability belt helps to
keep pack secure over
technical terrain.
Designed to fit range:
43-53cm (17-21”) torso
66- 116cm (26-46”)
waist This Item is
perfect for Perfect for
off road riders tired of
the uncertainty when
drinking from dirty water
bottles. Key features
Magnetic Tube Trap
3-litre capacity Air
panels On and off lever
Availability: In Stock
£89.99
Available
-
Replacement clamp covers
for PRS-2OS, PRS-3OS,
PRS-5, PRS-6 (made after
1996), PRS-7 and PRS-8
Workstands with double
cable reliefs This is the
common shop stand jaw
cover Clamp models that
use this are the 100-3C,
100-5C, and 100-8C
clamps Simply discard old
covers and install new
covers; each set includes
two circlips
Availability: In Stock
£11.99
Available
-
The Fabric Chamber-R
Multi Tool is the
ultimate pocket tool kit.
Jam-packed with 13
functions and a unique
double-sided ratchet
head, your pocket
mechanic can go to work
on even the toughest,
hard to reach bike
adjustments. As
everything packs into the
smooth sided case the
Chamber-R will happily
sit in your jersey pocket
without snagging or
puncturing gels or tubes.
Features Stainless steel
bits Long bits reduce
risk of loss Micro
ratchet head Easily
reaches awkward bolts
Long body increases
leverage Thirteen
functions Hex (mm): 2,
2.5, 3, 4, 5, 6, 8
Phillips head: 1, 2 Flat
head: 3 Torque: 10, 25
Availability: In Stock
£39.99
Available
-
The Fabric 8 in 1 Compact
Multi Tool is designed
for roadside adjustments
and emergencies. Tailored
to the needs of road
riders the Fabric 8 in 1
multi toll is a
well-equipped and
portable jersey pocket
essential. Upping the
ante from the 6-in-1
tool, it comes with the
addition of a 2mm Hex key
and flat-head
screwdriver. With a
lightweight aluminium
carrier and precision
CNC-machined tool bits,
this is a versatile,
portable roadside
multi-tool. The flat
design which folds so
that all the sharp bits
point inwards makes it
easy to slip in and out
of your pocket without
snapping your jersey or
accidently puncturing a
gel. Features CNCd steel
tools Ergonomic sides 360
degree bit movement
Lock-tight sealed bits
Lightweight aluminium
body Eight functions Hex
key (mm): 2, 3, 4, 5,
6 Phillips head: 2 Flat
head: 5 Torque: 25
Availability: In Stock
£17.99
Available
-
Park Tool Tyre lever TL1C
set of 3.Packaged in sets
of three, the Park Tool
Tire Levers are made of
glass-injected nylon to
ensure long life and
damage-free operation.
The unique design of the
TL-1 actually lifts the
tire away from the rim
and keeps the tube from
being pinched.Puncture
Kits & LeversBicycle
puncture repair kits and
tyre levers are an
essential item if
travelling by bike, if
you are unlucky enough to
get a number of punctures
and run out of tubes you
will be glad you brought
along your puncture
repair kit. Tyre levers
are also useful in cold
weather when your fingers
are aching from the
winter elements. Its also
worth considering
puncture prevention in
the form of tyre liners
and inner tube sealants,
both of these products
work well and help
minimise the risk of a
flat tyre, meaning you
can stay on the bike and
enjoy the ride.Park Tool
has been manufacturing
bicycle specific tools
since 1963. Based out of
St. Paul Minnesota, they
are the worlds largest
bicycle tool
manufacturer. A long-term
dedication to quality and
innovation, Park Tool is
the first choice of
professional and home
bicycle mechanics around
the world. Their vision
is shaped by more than 40
years of experience in
the bicycle industry,
beginning with retail
stores. There they
learned first hand the
changing needs of quality
bicycle repair and
maintenance.
Availability: In Stock
£3.99
Available
-
Can be kept inside the
thru-axle or left off the
bike to save weight Lever
is held securely by
internal o-ring on the
thru-axle
Availability: In Stock
£12.99
Available
-
The Finish Line Pro Shop
Apron has been designed
by mechanics, for
mechanics. Made from
washable heavy-duty
cotton with an
easy-adjust neck loop and
simple waist. Look pro,
and stay clean with the
Finish Line Shop Apron.
Features Designed with
input from shop mechanics
to make this the most
advanced apron available
prevents bike grime
getting onto your
civilian clothes made
from washable heavy duty
cotton canvas length is
adjustable, and all
seams are double stitched
Availability: In Stock
£14.99
Available
-
The Specialized EMT Cage
Mount MTB Multi-Tool
conveniently attaches to
any bike with a SWAT
technology compatible
water bottle cage. The
MTB Multi-Tool has the
essential Allen keys and
Torx bits you need to
adjust and tighten the
bolts on your mountain
bike. Features Mounts to
the bottom of any Zee
Cage II or Rib Cage II
Made with hardened CRV
steel bits with anti rust
coating and forged alloy
frame Slotted
screwdriver, 3mm, 4mm,
5mm, 6mm, 8mm, T25
Plastic cradle holds tool
securely and rattle free
with a secondary latch
Availability: In Stock
£48.00
Available
-
The Fenwick’s Chain
Cleaning Sponge is a
quick and simple method
to keeping your bike
chain clean. The Chain
Cleaning Sponge is made
from heavy duty honeycomb
plastic, with a unique
v-shaped slot. It may not
look much, if washed out
after every use, it will
clean up chains time and
time again. Use this
simple, yet effective
Chain Cleaning Sponge
with Fenwick’s Foaming
Chain Cleaner. It will
transform the way you
look after your drive
chain, making the
laborious job of cleaning
your chain quick and
easy. Directions for use:
Apply Fenwick’s Foaming
Chain Cleaner and allow
to soak in Insert chain
into ‘V’ slot of
sponge on the lower
section of the chain
Holding sponge firmly in
position, run the chain
backwards through the
sponge for 30 seconds
Rinse the chain
thoroughly with clean
water Re-lube with any
Fenwick’s chain lube To
clean the sponge, just
apply some Fenwicks
Foaming Chain Cleaner to
the ‘V’ slot straight
after use, rub it in and
rinse thoroughly. Handy
hint: For best results
use leave the Foaming
Chain Cleaner on the
chain for 2 to 3 minutes
to let the foam work its
magic and dissolve.
Fenwick’s are a UK
based company founded and
run by outdoor
enthusiasts with a strong
cycling background they
actively support a broad
range of British mountain
bike and road cycling
teams and events. Their
UK Made bike cleaning and
maintenance products have
a strong emphasis on
being environmentally
friendly. They have led
the way for over 20 years
with biodegradable
concentrates and are now
redefining
performance-oriented
biodegradable chain
lubes.
Availability: In Stock
£1.99
Available
-
The Fabric 16 in 1 Multi
Tool is a pocket workshop
which lets you quickly
fix whatever on-ride
mishaps come your way.
Packed with 16 individual
precision CNC machined
parts and a lightweight
aluminium body, its
function rich, yet still
jersey-pocket friendly -
the perfect pocket
companion for the open
road or trail. The 16 in
1 multi tool is broad and
flat rather than stacking
multiple layers of tools
on top of each other.
This makes the 16 in 1
tool sit better in jersey
pockets and easier to
slide into a saddle bag
or pocket. Features Hex
(Allen) keys (mm): 2,
2.5, 3, 4, 5, 6, 8
Spoke gauge: 13, 14,
15, 16 Phillips head: 2
Torque: 25 Mavic spline
Bottle opener Chain
splitter
Availability: In Stock
£24.99
Available
-
The Lezyne 3 way spoke
wrench is a shop quality
spoke wrench with an
ergonomic design. Shop
quality three-way spoke
wrench. Compact,
ergonomic design. Super
durable cast steel body.
CNC machined slots for
precise engagement.
Availability: In Stock
£15.99
Available
-
The Fabric 6 in 1 Mini
Multi Tool will easily
sort the most common
roadside issues.
CNC-machined tool bits
and a light, machined
alloy carrier make the
6-in-1 tool strong and
dependable. Like all
Fabric tools it is
ergonomically designed
and will slide in and out
of a jersey pocket
without snagging the
material or other gear.
Features CNCd steel tools
Ergonomic sides 360
degree bit movement
Lock-tight sealed bits
Lightweight aluminium
body Six functions Hex
key (mm): 3, 4, 5, 6
Phillips head: 2 Torque:
25
Availability: In Stock
£14.99
Available
-
An updated version of the
original and best selling
Park Master Link pliers
MLP-1.2 Master Link
Pliers have cleverly
redesigned tips,
allowing them to be used
to re-join stiff or
corroded master links as
well as split them Simply
insert the specially
sized jaws into the
masterlink and squeeze
the handles Made in the
USA and covered by Park
Tools legendary limited
lifetime warranty
Availability: In Stock
£14.99
Available
-
MB1 Magnetic Tool Tray
A
must have bench top
accessory that keeps
small parts accessible
and all in one place 15
cm diameter parts bowl
with an extra strong
magnet to stop you
loosing vital component
parts on the floor,
under the workbench, or
in the grass
Availability: In Stock
£7.99
Available
-
A complete take-along
trail tool featuring
i-beam technology, which
is strong, compact and
lightweight features a
full complement of
emergency tools: 1.5, 2,
2.5, 3, 4, 5, 6,
and 8 mm hex wrenches t25
star shaped wrench flat
blade screwdriver tyre
lever, with two integral
spoke wrenches 10-speed
compatible chain tool a
portable trail side
workshop designed to get
you out of trouble and
back on the bike covered
by park tools legendary
limited lifetime warranty
Availability: In Stock
£27.99
Available
-
A highly durable metal
tool to remove and
install Shimano
HollowTech II integrated
bottom brackets and
chainsets 16 Laser cut
splines securely engage
the notches of the bottom
bracket cups, while the
other end fits the 8
internal splines of the
crank arm adjustment cap
Plastic coated handle for
a secure and comfortable
grip Warning: this tool
has a long handle and it
is possible to damage the
tool or the component by
over-tightening during
installation Made in the
USA and covered by Park
Tools legendary limited
lifetime warranty
Availability: In Stock
£24.99
Denmark